Goldfields DX Amateur Radio Group

Username:	Password:
Save Password
Forgot your Password?

All Forums

Main Area

Australian Ham Chat Area

1kw station would need to have its Antennas

Note: You must be registered in order to post a reply.

Screensize:

UserName:

Password:

Format Mode:

Format:

Message:

* HTML is OFF
* Forum Code is ON

Smilies

[quote][i]Originally posted by vk3pa[/i]
[br]in vk in meters away from any boundry line!!
ant-----     band----     distance---  mode---  cw--- ---         ssb------         rtty 
vert-----      160----------             m------------------                   1m------        1m------         1.2m
 vert----        80---------- ------------------------                                   3m------       3.3m------      4.8m
 vert-----         40---------------------------------                                  3m------        3.3m------      4,8m
4sq------          30---------------------------------                                  9.6m---     10.8m---   15.2m
204ba---     20---------------------------------                                  9.6m---     10.7m---    15.2m
174ca---     17---------------------------------                                  11.3m---    12.9m---    18.3m
155ca---      15---------------------------------                                  11.5m---   12.9m---    18.3m
125ca---      12---------------------------------                                  12.9m---   14.4m---    20.4m 
105ca---       10---------------------------------                                 12.9m---    14.5m---   20.4m

wot does this mean..
well @ vk3pa I need to relocate one of my towers into the block by 10 m .. (33ft).. if I want rtty I will have to relocate 2 of the towers hi hi
In summing up 160 m closest to boundry linrs es 10m in center of block!!
Vert are 1/4 wave, beams are Hy-gain on 50 ft es 75 ft nally towers
form factors used 
CW 40%
SSB COMPRESSION  50%
RTTY/PSK/AFSKSSB /VOICE FM  100%

With verticals, this has not taken into account the ground radial length! so your 1/4 wave radials would go beyond your boundry line!!!!
So for 160m add 124ft es 80m add 64 ft from vert to boundry!!
Gee, will I be ok if I go fer 1Kw for "EMR" reg's?????????
[/quote]

Check here to include your profile signature.
Check here to subscribe to this topic.

T O P I C R E V I E W

vk3pa

Posted - 07 Jan 2012 : 08:51:22 AM

in vk in meters away from any boundry line!!
ant----- band---- distance--- mode--- cw--- --- ssb------ rtty
vert----- 160---------- m------------------ 1m------ 1m------ 1.2m
vert---- 80---------- ------------------------ 3m------ 3.3m------ 4.8m
vert----- 40--------------------------------- 3m------ 3.3m------ 4,8m
4sq------ 30--------------------------------- 9.6m--- 10.8m--- 15.2m
204ba--- 20--------------------------------- 9.6m--- 10.7m--- 15.2m
174ca--- 17--------------------------------- 11.3m--- 12.9m--- 18.3m
155ca--- 15--------------------------------- 11.5m--- 12.9m--- 18.3m
125ca--- 12--------------------------------- 12.9m--- 14.4m--- 20.4m
105ca--- 10--------------------------------- 12.9m--- 14.5m--- 20.4m

wot does this mean..
well @ vk3pa I need to relocate one of my towers into the block by 10 m .. (33ft).. if I want rtty I will have to relocate 2 of the towers hi hi
In summing up 160 m closest to boundry linrs es 10m in center of block!!
Vert are 1/4 wave, beams are Hy-gain on 50 ft es 75 ft nally towers
form factors used
CW 40%
SSB COMPRESSION 50%
RTTY/PSK/AFSKSSB /VOICE FM 100%

Goldfields DX Amateur Radio Group

This page was generated in 0.06 seconds.

Snitz Forums 2000