Goldfields DX Amateur Radio Group

Username:	Password:
Save Password
Forgot your Password?

All Forums

Main Area

Australian Ham Chat Area

30m beacon

Note: You must be registered in order to post a reply.

Screensize:

UserName:

Password:

Format Mode:

Format:

Message:

* HTML is OFF
* Forum Code is ON

Smilies

Check here to include your profile signature.
Check here to subscribe to this topic.

T O P I C R E V I E W
vk3pa	Posted - 04 Dec 2006 : 12:18:20 PM this morning I had a problem with VK3RTS/95 beacon on 10.113Mhz. was beaming to eu look'n over bendigo vic es vk3rts/95 was qrming the eu sig on 10113.4. I have sent e-mail to AR Vic about using this freq, as dx band plan in other countries use 10.140 es up.. maybe only a local problem for us 30m cw operators !!hi in central Victoria..
2 L A T E S T R E P L I E S (Newest First)
vk3pa	Posted - 04 Dec 2006 : 5:26:32 PM e-mail rx from AR vic Hello Allan, Nice to hear from you. The VK3RTS/95 beacon on 10.112MHz is a low powered device of 5 watts which is currently in central Victoria BUT will pop up from various locations around the state in coming months. The 10.112MHz was allocated and coordinated by the WIA after taking into account that the Amateur Service is a secondary user of the band, existing beacons and other amateur radio activity. That frequency was the best compromise. If you are able to provide a signal report on the beacon I would be most pleased to put you in the log for a QSL card, Rgds Jim Linton VK3PC. From: Allan Greening <vk3pa@vk3pa.com> To: 95@amateurradio.com.au Date: Monday, December 4, 2006, 8:29:00 AM Subject: 30m beacon ===8<==============Original message text=============== why is the ARvic 30m beacon running on 10.113mhz in the middle of the international DX window ? .Most dx peditions call around 10.110!! would you please shift the beacon up above 10.140 as in most other countries.. ur's in DX.. Allan VK3PA ===8<===========End of original message text=========== Just in from Mr Pants -- Best regards, vk3fce mailto:vk3fce@internode.on.net --------------------------------------------------------------------
vk3pa	Posted - 04 Dec 2006 : 5:22:56 PM e-maqil sent to AR Vic why is the ARvic 30m beacon running on 10.113mhz in the middle of the international DX window ? .Most dx peditions call around 10.110!! would you please shift the beacon up above 10.140 as in most other countries.. ur's in DX.. Allan VK3PA

Goldfields DX Amateur Radio Group

This page was generated in 0.5 seconds.

Snitz Forums 2000